Admin: Created Component Concepts article documenting Mike Casady's founding of CCI, the original Phantom and its variants, the 1996 semi-automatic Revolution prototype, the later pump-action Revolution and the 2019 transfer of the Phantom product line to Extreme Velocity.

2026-10-20T07:08:43Z

Created Component Concepts article documenting Mike Casady's founding of CCI, the original Phantom and its variants, the 1996 semi-automatic Revolution prototype, the later pump-action Revolution and the 2019 transfer of the Phantom product line to Extreme Velocity.

New page

'''Component Concepts Inc.''' ('''CCI''') was an American [[paintball equipment]] manufacturer founded by [[Mike Casady]] in 1979. Based in Newberg, Oregon, the company became known for developing and manufacturing the [[CCI Phantom]], a .68-calibre pump-action [[paintball marker]] introduced in 1987.[1][2]

The Phantom was produced in numerous configurations for [[stock-class paintball]] and open-class pump play. CCI also developed the experimental [[Phantom Revolution]], an electrically assisted semi-automatic prototype demonstrated in 1996, and a separate pump-action marker marketed under the Revolution name during the 2010s.[3][4]

In May 2019, Casady transferred the Phantom product line to [[Extreme Velocity]], which continued manufacturing and distributing the equipment under the Phantom brand.[5]

== History ==

=== Establishment ===

Component Concepts was established in 1979 to provide industrial product design and manufacturing services.

In 1986, founder Mike Casady began developing a pump-action paintball marker based on the Nelson operating system.

The resulting Phantom entered commercial production in 1987, following approximately six months of development.[1][2]

The original design used a fixed barrel and breech assembly, commonly described as a unibody, together with a modified Crosman air pistol trigger frame and a quick-change system for 12-gram CO₂ cartridges.

In 1988, CCI replaced the original trigger frame with an M16-style grip arrangement.

Further changes during 1989 and 1990 included a removable barrel system and adaptors for larger CO₂ and compressed-air tanks.[1]

=== Development of the Phantom ===

The Phantom became CCI's principal commercial product.

Its design retained the Nelson-style valve and mechanical pump operation while offering interchangeable components and feeding arrangements.

Players could configure the marker for stock-class operation using a horizontal feed tube and 12-gram CO₂ cartridge, or for open-class operation using a gravity-fed hopper and larger gas tank.

The marker was also available with different barrel lengths, grips, pump handles, air-source arrangements and anodised finishes.[1][6]

CCI continued manufacturing the Phantom throughout the 1990s and 2000s, with the original design remaining compatible with numerous replacement and upgrade components.

=== Phantom Revolution prototype ===

During the early 1990s, CCI developed an experimental semi-automatic marker known as the '''Phantom Revolution'''.

The marker used an electrically driven rotating breech rather than a conventional reciprocating bolt.

In October 1996, Mike Casady demonstrated working prototypes at the [[NPPL World Cup]] in Orlando, Florida.

Contemporary reporting by [[WARPIG]] described an onboard electronic system that used a microphone to detect the sound of the marker firing. The system then activated a motor to rotate the breech and chamber another paintball.

The firing valve itself was mechanically operated.[3]

The design was intended to prevent paintballs from being damaged during loading by eliminating the conventional bolt movement.

VintageRex records that components for approximately 50 markers were manufactured, of which 12 were assembled.

The design did not enter normal commercial production.[4]

=== Production Phantom Revolution ===

CCI later introduced a separate pump-action marker using the '''Phantom Revolution''' name.

Unlike the experimental semi-automatic prototype, this version used a manually operated pump mechanism and a power-piston firing system.

The manufacturer's operating manual, copyrighted in 2011, documents the production Revolution as a .68-calibre pump marker compatible with CO₂ or compressed air.[7]

A 2013 CCI product catalogue offered the Revolution in both stock-class and open-class configurations.[8]

The two Revolution designs were mechanically distinct and should not be treated as successive versions of the same operating system.

=== Transfer of the Phantom product line ===

In May 2019, Mike Casady announced the transfer of the Phantom product line to Extreme Velocity Inc., an Oregon paintball retailer and equipment business.

The new owner acquired the Phantom manufacturing operation and continued using the Phantom Online name.

Extreme Velocity identified Brian Bradley and Jesse as the individuals involved in taking over the product line.

According to the company's published history, the manufacturing operation was moved into its workshop, where Phantom markers continued to be assembled by hand.[5]

The transfer marked the end of Casady's direct operation of the original Phantom manufacturing business.

The Phantom brand and product line continued under Extreme Velocity ownership.[5]

== Paintball markers ==

The [[VintageRex]] historical paintball database lists five entries under Component Concepts.[9]

{| class="wikitable"
! Marker
! Documented period
! Description
|-
| [[CCI Phantom|Phantom]]
| Introduced 1987
| Original Nelson-style pump marker, later available with removable barrels and interchangeable feeding arrangements.
|-
| [[Phantom Express]]
| Listed as 1988
| Early unibody Phantom configuration with a fixed 14-inch barrel.
|-
| [[Phantom Shadow]]
| Late 1980s
| Early unibody configuration with a fixed 8-inch barrel.
|-
| [[Phantom Tournament]]
| Late 1980s
| Early unibody configuration with a fixed 12-inch barrel.
|-
| [[Phantom Revolution]]
| Prototype demonstrated 1996
| Experimental semi-automatic marker using an electrically operated rotary breech.
|}

VintageRex assigns 1985 dates to the Shadow and Tournament entries. These dates conflict with CCI's own statement that development began in 1986 and commercial production began in 1987. They are therefore not treated as verified introduction dates.[1][9]

The later pump-action Phantom Revolution is not separately listed in the VintageRex catalogue but is documented in CCI's official operating manual and 2013 product catalogue.[7][8]

== Phantom operating system ==

The standard Phantom uses a Nelson-style pump-action operating mechanism.

Pulling the pump handle backwards and returning it forwards prepares the marker to fire and chambers a paintball.

When the trigger is pulled, the hammer strikes the valve mechanism, releasing compressed gas through the power tube to propel the paintball.

The system is mechanically operated and does not require electronic controls.

The Phantom can be configured to operate using 12-gram CO₂ cartridges or a larger CO₂ or compressed-air supply.[6]

== Configurations and accessories ==

CCI manufactured numerous interchangeable components for the Phantom.

Its 2013 catalogue documented several standard configurations and upgrade options.[8]

=== Stock-class configurations ===

Stock-class Phantoms typically used a horizontal feed tube holding a limited number of paintballs and a 12-gram CO₂ cartridge.

CCI offered 10-round and 15-round feed tubes, together with alternative feeding and air-source arrangements.

Vertical-air stock-class configurations were also available.

=== Open-class configurations ===

Open-class Phantoms used a gravity-fed hopper and could operate with larger gas tanks.

CCI offered right-feed, left-feed and centre-feed breech configurations.

A variety of bottom-line and vertical-air adaptors allowed the air system to be positioned according to player preference.

=== Other components ===

CCI's documented accessory range included:

* Interchangeable barrels.
* Stock-class feed tubes.
* Direct-feed breech assemblies.
* 12-gram CO₂ changers.
* Vertical-air and bottom-line adaptors.
* Alternative pump handles.
* Under-cocking conversion kits.
* Sight rails.
* Adjustable shoulder stocks.
* Replacement valve and internal components.
* Paintball detent rings.

These components allowed owners to change the Phantom's configuration without replacing the entire marker.[8]

== Tournament and recreational use ==

The Phantom was used in recreational and competitive pump-action paintball.

Its modular design made it suitable for different forms of pump play, including stock-class formats using limited ammunition and 12-gram CO₂ cartridges.

CCI continued supporting pump-action paintball during the period when semi-automatic and electronic markers became increasingly common in tournament competition.

The Phantom remained commercially available for more than three decades under Casady's ownership and continued in production following the 2019 transfer of the product line.[1][5]

== See also ==

* [[Mike Casady]]
* [[CCI Phantom]]
* [[Phantom Revolution]]
* [[Stock-class paintball]]
* [[Pump paintball]]
* [[Extreme Velocity]]
* [[List of vintage paintball markers and equipment]]

== References ==

# [https://phantomonline.com/about/ Phantom Online, "About the Company", official history of Component Concepts and development of the Phantom].
# [https://paintmagazine.com/marker-of-the-day/cci-phantom/ Paint Magazine, "CCI Phantom", historical marker profile].
# [https://www.warpig.com/paintball/tournament/wc96/vendor.shtml WARPIG, "NPPL 1996 World Cup: Vendors", October 1996, contemporary demonstration of the Phantom Revolution].
# [https://www.vintagerex.com/cgi-bin/index.cgi?action=viewmarker&man=CCI+-+Component+Concepts&marker=Phantom+Revolution VintageRex, "Phantom Revolution", historical prototype record].
# [https://extreme-velocity.com/contact-us/ Extreme Velocity, "Our Story", documenting the May 2019 acquisition of the Phantom product line].
# [https://www.vintagerex.com/cgi-bin/index.cgi?action=viewmarker&man=CCI+-+Component+Concepts&marker=Phantom VintageRex, "Phantom", historical marker specifications and configurations].
# [https://manualzilla.com/doc/5717701/user-s-manual-paintball-marker Component Concepts Inc., "Phantom Revolution User's Manual", copyright 2011].
# [https://phantomonline.com/wp-content/themes/phantom/manuals-guides/2013-Brochure-4-page.pdf Component Concepts Inc., "Quality Pump Paintball Markers Since 1987", manufacturer product catalogue, 2013].
# [https://www.vintagerex.com/cgi-bin/index.cgi?action=viewdb&man=CCI+-+Component+Concepts VintageRex, "CCI - Component Concepts", manufacturer catalogue].

== External links ==

* [https://phantomonline.com/ Phantom Online, official website]
* [https://www.vintagerex.com/cgi-bin/index.cgi?action=viewdb&man=CCI+-+Component+Concepts Component Concepts at VintageRex]
* [https://phantomonline.com/about/ Phantom Online company history]
* [https://phantomonline.com/wp-content/themes/phantom/manuals-guides/2013-Brochure-4-page.pdf Original 2013 CCI product catalogue]

[[Category:Paintball manufacturers]]
[[Category:American paintball companies]]
[[Category:Paintball equipment manufacturers]]

Component Concepts - Revision history

Admin: Created Component Concepts article documenting Mike Casady's founding of CCI, the original Phantom and its variants, the 1996 semi-automatic Revolution prototype, the later pump-action Revolution and the 2019 transfer of the Phantom product line to Extreme Velocity.