Editing Dangerous Power (section)

== Principal marker families ==

=== Fusion and F8 ===

The original '''Fusion''' used a stacked-tube electronic pneumatic system.

Its operating mechanism consisted of a ram assembly controlling a hammer and poppet valve, with an electronic solenoid controlling the firing cycle.

The design incorporated:

* Electronic trigger activation.
* Programmable firing modes.
* Break-beam anti-chop eyes.
* Removable bolt assembly.
* Low-pressure pneumatic ram.
* Adjustable inline regulator.
* Autococker-compatible barrel threads.

A technical examination published by ZDSPB documents the Fusion's stacked-tube construction, ram assembly, valve and integrated low-pressure regulator.[5]

The F8 retained the general Fusion operating system while introducing revised components and body machining.

=== Threshold ===

The '''Threshold''' was a .68-calibre electronic marker using a single-tube pneumatic firing arrangement.

Its manufacturer documentation records operating pressures below 200 psi, with compressed air regulated through a high-pressure regulator before reaching the marker's firing system.[11]

The Threshold was equipped with electronic firing controls and a RAPS air-source adaptor.

=== G3 ===

The '''G3''' was a compact electronic marker developed around a different operating system from the Fusion.

Instead of a stacked-tube ram and poppet arrangement, it used a single-tube, electronically controlled blow-forward bolt system.

The manufacturer equipped it with a clamping feedneck, break-beam eyes, programmable electronics and RAPS air-source adaptor.[11]

The G3-iQ was originally marketed as an international variation.

In June 2009, Dangerous Power announced an updated G3-iQ fitted with the same clamping feedneck and RAPS features supplied on the standard G3.[6]

=== G3 Spec-R ===

The '''G3 Spec-R''' was introduced in November 2009.

Dangerous Power redesigned its dump-valve system to remove the external bolt O-rings used in earlier arrangements.

The manufacturer also revised the body, trigger electronics and feedneck.

Its published specification listed a marker weight of approximately 765 grams and an operating pressure of 150 psi.[12]

=== REV-i ===

The '''REV-i''' was developed as a higher-end electronic marker.

The manufacturer's promotional material described its pneumatic engine as having one moving part and five O-rings.

The REV-i incorporated:

* Rear-mounted OLED display.
* Programmable electronic firing modes.
* SwitchBlade reversible trigger.
* Rear-mounted operating-pressure gauge.
* RAPS air-source adaptor.
* Removable internal bolt assembly.

The marker was commercially introduced in April 2009.[6][13]

=== Fusion X ===

The '''Fusion X''', also known as the '''Fusion FX''', continued the stacked-tube Fusion platform.

Dangerous Power's product documentation identifies a redesigned ram, revised firing valve, integrated electronics and SwitchBlade trigger.

The manufacturer specified an operating pressure of approximately 140 psi at a paintball velocity of 280 feet per second.[7]

=== G4 and G5 ===

The '''G4''' continued the blow-forward marker platform established by the G3.

It incorporated revised bolt internals, a magnetic trigger, updated regulator and clamping feedneck.

Dangerous Power specified an operating pressure of approximately 200 psi at 280 feet per second.[8]

The '''G5''' introduced further changes, including the Subsonic Bolt Engine, Riptide regulator and redesigned hose-free frame.

The manufacturer also revised the trigger and feedneck arrangements.

Its published operating specification was approximately 200 psi.[9]