Editing Combat Connection (section)

== History ==

=== Early development ===

Combat Connection was active by the late 1980s, developing aftermarket modifications for existing pump-action paintball markers.

One of its earliest documented products was the Swarm Gun, which [[VintageRex]] dates to 1988.[3]

The Swarm Gun was a conversion incorporating an extended barrel, custom pump arm and replacement bolt fitted to an existing Sheridan marker.

Combat Connection subsequently developed the Enforcer, which VintageRex dates to 1989.[1]

=== Enforcer development ===

The original Enforcer was designed by Kent Carroll, identified in contemporary advertising as a member of Swarm.

The design incorporated the side-tap constant-air arrangement developed by Gramps & Grizzly.

An original advertisement preserved by VintageRex describes the Enforcer as a conversion kit for existing Sheridan PGP and PMI paintball markers.[2]

The conversion could be installed without drilling or cutting the original marker. Its components included a replacement barrel assembly, oversized pump handle, gravity-feed system and constant-air connection.

The manufacturer also promoted the conversion's simplified maintenance, describing a quick-release bolt arrangement that allowed access to internal components without specialised tools.[2]

=== Enforcer II ===

Combat Connection subsequently introduced the Enforcer II, which VintageRex dates to 1990.

The revised design eliminated the separate magazine block used on the original Enforcer and incorporated a built-in direct-feed arrangement.

The Enforcer II also used the Gramps & Grizzly side-tap air system and was commonly configured with a CO₂ tank mounted beneath the stock.

VintageRex records the marker as having been used by Swarm and subsequently as rental equipment at Fox River Games.[4]

The archive reproduces an estimate attributed to Lou, known as Gramps, that as many as 2,000 Enforcer II markers may have been produced. The account does not establish whether that figure includes all manufacturers and versions.

=== Enforcer III ===

The Enforcer III followed in 1991, according to VintageRex.

Its principal documented change was the introduction of a removable barrel, replacing the fixed-barrel arrangement of the earlier models.

The Enforcer III was also available with accessories including a sight rail, auto-trigger, shoulder stock and alternative barrel lengths.

VintageRex records an estimated production quantity of 150 to 200 examples, attributed to Lou of Gramps & Grizzly. This figure has not been independently confirmed.[5]

The same historical account suggests that Combat Connection ceased operating around the period of the Enforcer III. The exact date and circumstances of its closure have not been established.